Instructions - GLASSGUARD™ GLASS RESTORATION STAIN REMOVER

Application GLASSGUARD™ Glass Restoration Stain Remover 

 

IMPORTANT: Please ensure the area being treated is ventilated. Do not store in direct sunlight. Store in its sealed container and keep away from children and pets. In the event of eye contact, wash out immediately with water. Do not swallow or inhale. Seek medical advice if necessary.

 

Step 1: Applying the Stain Remover

Remove the Stain Remover bottle and White Scourer pad from the box or package.

Give the Stain Remover bottle a good shake for 10-20 seconds.

Open the Stain Remover bottle and, holding the scourer pad flat, pour a small amount of liquid onto the scourer pad.

Apply the liquid onto the glass surface in circular motions. Continue until you have covered the entire glass surface. 

Leave the Stain Remover on the glass surface for 10-20 minutes to allow the active ingredients to work. 

 

Step 2: Removing the Stain Remover

After the 10-20 minutes is finished, if the glass is badly stained you may want to go over the glass surface again with the scourer pad.

You can remove the Stain Remover with a damp cloth or rinse it off with the shower head. 

If there is remaining residue from the Stain Remover you may want to give the glass another wipe with a clean cloth or use a basic alcoholic glass cleaner to remove the residue. 

Step 3: Post application

Congratulations! Your glass has been restored to a pristine condition. Now would be the perfect time to apply our GLASSGUARD™ Nanocoat DIY Kit

This will add a protective, non-stick coating to your glass, preventing the build-up of stains, making the glass easier to clean and stay clean for longer. The coating is very easy to apply and lasts for 5+ years.